How flue gas heat recovery solves Carbon Capture issues
![](https://heatmatrixgroup.com/wp-content/uploads/2021/05/HM-Knowledge-Center-Thumbnail-PTQ-CCS-problems-V1.1.jpg)
Reliable waste heat recovery from corrosive flue gas
![](https://heatmatrixgroup.com/wp-content/uploads/2021/05/HM-Knowledge-Center-Thumbnail-PTQ-Reliable-heat-recovery-V1.jpg)
Low corrosion rates despite cooling through Acid Dew Point
![](https://heatmatrixgroup.com/wp-content/uploads/2021/05/HM-Knowledge-Center-Thumbnail-PTQ-Flue-gas-heat-recovery-V1.jpg)
How-to calculate the Acid Dew Point (ADP) of flue gas
![Acid Dew Point graph](https://heatmatrixgroup.com/wp-content/uploads/2021/05/HeatMatrix-ADP-visual-V1.jpg)
When flue gas reaches a temperature below the acid dew point, acidic elements will condense. This could cause heat exchanger corrosion. Knowing the acid dew point of your flue gas enables you to select the appropriate materials for your heat recovery installation. ARTICLE 4 MINUTE READ What is the Acid Dew Point? The acid dew […]
Managing fouling in Polymer Economisers
![HeatMatrix infosheet about managing fouling in polymer economisers](https://heatmatrixgroup.com/wp-content/uploads/2021/04/HeatMatrix-Infosheet-Managing-fouling-in-Polymer-Economisers-Thubmnail-V1.jpg)
Managing fouling in Polymer Economisers How the economiser cleans itself and is kept free from fouling Significant energy savings can be achieved when heat is recovered from hot flue and exhaust gases. When these hot flue and exhaust gases are fouling, management of this fouling is important in order to avoid heat exchanger blocking. The […]
Managing fouling in Polymer Air Preheaters
![HeatMatrix infosheet about managing fouling in polymer air preheaters](https://heatmatrixgroup.com/wp-content/uploads/2021/04/HeatMatrix-Infosheet-Managing-fouling-in-Polymer-APH-Thumbnail-V2.1.jpg)
Managing fouling in Polymer Air Preheaters How the air preheater cleans itself and is kept free from fouling Significant energy savings can be achieved when heat is recovered from hot flue and exhaust gases. When these hot flue and exhaust gases are fouling, management of this fouling is important in order to avoid heat exchanger […]
6% Steam Boiler efficiency increase in Paper Mill
![Paper roll in a paper mill in Europe](https://heatmatrixgroup.com/wp-content/uploads/2021/02/HM-Knowledge-Center-Thumbnail-Paper-Mill-europe-V2.jpg)
Corrosion effects when cooling through the Acid Dew Point
![HeatMatrix infosheet about corossion effects when cooling through the Acid Dew Point](https://heatmatrixgroup.com/wp-content/uploads/2021/02/HeatMatrix-Infosheet-Cooling-through-the-Acid-Dew-Point-Effects-on-downstream-equipment-Thumbnail-V2.1.jpg)
Corrosion effects when cooling through the Acid Dew Point What happens to equipment downstream of a polymer heat exchanger? The HeatMatrix polymer heat exchanger technology allows operators to recover heat to temperatures below the acid dew point. In the polymer heat exchanger, sulphuric acid condenses out. This results in a lower acid dew point of […]
Corrosive flue gas is no longer a showstopper for heat recovery
![white paper about enabling heat recovery from corrosive flue gases with a polymer economiser](https://heatmatrixgroup.com/wp-content/uploads/2020/10/HM-Knowledge-Center-Thumbnail-Whitepaper-2.jpg)
Heat can be recovered from Corrosive and Fouled flue gas Download White paper In the industry, significant amounts of energy are lost via the stack. Stack losses are concentrated and therefore a great place to recover heat. However, acid dew point corrosion has been stopping operators from recovering this heat. But not any longer! Interested […]